1-519-758-7901

Main

1-866-519-9817

Toll Free

1525 Windham Rd 12

Simcoe, Ontario, Ca, N3Y 4K3

SINCE 1999 - 21 PLUS YEARS

YOUR ELECTRICAL CONTROL SPECIALIST

PICK YOUR APPLICATION TO FIND YOUR PRODUCT

POWER CHOICE

This is a newly developed product to take care of your Keyswitch and Battery power needs when you are installing your product(s). Supply battery power and ground to the Power Choice module and it will convert Battery power to Keyswitch power with a 80 amp relay. The Power Choice has 5 different fused power outputs that can be fused up to 15 amp each, the maximum total output for the 5 lines is 50 amps. There are also 6 battery ground outputs that are available. These 5 power and 6 grounds come out to a 12 pin Deutsch connector. The battery power and ground connections can handle up to a 8 gauge wire to allow a 50 amp delivery. The dimensions are 5.5" X 3.5" X 2.25"
PRICING

AUTOMATIC FORCED REGEN CONTROLLER

The AFR will automatically initiate a regeneration when the engine is requesting it. When you have to leave your truck unattended and running, the AFR will make sure that the engine stays at the proper operating temperature by controlling the engine RPM. When the engine request a regeneration, the AFR will sense this request and will lower the engine RPM to idle, then it will send a signal to the ECM to cause the engine to go into a regen. It will monitor the engine status and once it has completed the regeneration, it will bring the engine back up to a fast idle and it will continue to look for the next request for a regen.
PRICING

COOLER FAN CONTROL MODULE

The CFC101 is a very robust product that will control your hydraulic cooler fans. There are two 80 amp relays, one for each output that is protected by a by a 30 amp circuit breaker. The PCB was created to handle the high currant that is needed to drive the cooler fans. The side indicator lights will let you know when the fan is in on, with optional outputs for external indicator lights that can be mounted in a remote location. The CFC can be activated by a positive or a ground input. This product measures 4"X4"X2" (10.16X10.16X5.08mm)
PRICING

EDRJ100 -J1939 ENGINE CONTROL MODULE

The EDRJ100 is a great product to control your engine remotely. It comes with three set speeds and a variable RPM. It also will control your engine remote start and stop. Cab throttle inhibit and limitation is available. We have also included PTO overspeed protection. The parameters can be programmed with our software and our communication adapter kit. Some programming can be done internally. It is compatible with most engines. Easy to install.
PRICING

EDRJ200 -J1939 ENGINE CONTROL MODULE

The primary feature of the EDRJ200 series is at it will work with a variable analog signal from your hand or foot throttle to control the engine RPM. It also will control your engine remote start and stop. Cab throttle inhibit and limitation is available. We have also included PTO overspeed protection. The parameters can be programmed with our software and our communication adapter kit. Some programming can be done internally. It is compatible with most engines. Easy to install.
PRICING